Filter
Top Products
First, use the ‘Drum Select’ function to select the drum sound to be edited. Press the ‘OUT-
PUT SET’ button once - the display alternates between:
Display Ident.( Selected drum ) Value ( Individual output 1 )
Use the ‘-’ and ‘+’ buttons to change the value. Use the ‘Drum Select’ function again to change settings on another drum
sound. This setting can be saved with the program. See ‘Writing a program into memory, on page 13.
Any number of drum sounds can be routed to an Individual output enabling a ‘stack’ of sounds to be processed in a similar
manner.
Example: TR808 Snare - TR909 Snare - TR909 Handclap all routed to output 1 - all treated with the same effect i.e.
Reverb/Compression/Eq etc.
NOTE 1: When a drum sound is routed to an Individual output it will be removed from the Stereo left/right mix and
Headphone outputs.
NOTE 2: The stereo output ‘Pan’ setting can also be accessed via MIDI. This feature allows real-time, dynamic changes to
be made during a performance. See the ‘Controller Map’ section on page 42.
Utility Mode
Output Set
38
MIDI RX CH
MIDI TX CH
PROGRAM
EDIT WRITE
UTILITY
SAVE
MIDI RX CH
MIDI TX CH
PROGRAM
EDIT WRITE
UTILITY
SAVE