Filter
Top Products
Convenient Functions
Making the Power Automatically
Turn O After a Time (Auto O)
With the factory settings, the unit’s power will automatically be
switched o 30 minutes after you stop playing or operating the
unit.
If you don’t need the power to turn o automatically, set “Auto O”
to the “OFF” setting as described below.
1. While holding down the [Key Touch] button, press the
[Transpose] button.
2. Use the [ ] [ ] (Slow/Fast) buttons to select “Auto
O.”
3. Use the [–] [+] buttons to change the setting.
Value Explanation
OFF The power will not turn o automatically.
10
The power will automatically turn o if no
operation is performed for 10 minutes.
30 (default)
The power will automatically turn o if no
operation is performed for 30 minutes.
240
The power will automatically turn o if no opera-
tion is performed for 240 minutes (4 hours).
* This setting is automatically stored in the unit.
4. Press the [Key Touch] button or the [Transpose] button to
nish the procedure.
Retaining the Settings Even After
Power-o (Memory Backup)
The settings of the unit will return to their factory-set state when
you turn o the power. However, you can store the settings so that
they will be retained even after the power is turned o.
This is called the “memory backup” function.
Parameters Stored in Memory Backup Page
Split Point p. 17
Ambience (on/o, depth) p. 18
Brilliance (on/o, depth) p. 18
Key Touch (on/o, value) p. 19
Twin Piano mode p. 20
Dual Balance p. 44
Master Tuning p. 44
Temperament p. 44
Temperament Key p. 44
Stretch Tuning p. 44
Damper Resonance p. 44
String Resonance p. 45
Key O Resonance p. 45
Cabinet Resonance p. 45
SoundBoard Behavior p. 45
Transpose Mode p. 45
Damper Pedal Part p. 45
MIDI Transmit Channel p. 46
Visual Control Channel p. 47
1. While holding down the [Key Touch] button, press the
[Transpose] button.
2. Use the [ ] [ ] (Slow/Fast) buttons to select “Backup.”
3. Press the [Song] button.
A screen will appear, allowing you to execute the backup.
4. Press the [ ] (Fast) button to select “Y.”
Memory backup will begin.
If you decide to cancel without executing, press the [
] (Slow)
button to select “N.”
When the memory backup has been completed, the screen of step
2 will appear.
NOTE
Never turn o the power while the screen indicates “Working...”
5. Press the [Key Touch] button or the [Transpose] button to
nish the procedure.
39
Operation Guide Panel Descriptions Before You Play Performing Practicing
Convenient Functions
Appendix
Function Mode