Filter
Top Products
37
Recording Your Performance
Start recording
6
Press the [ (Play/Stop)] button.
After a two-measure count, recording will begin.
Note that recording will also begin as soon as you play anything on the keyboard, even if you do not
press the [ (Play/Stop)] button. In this case, no count will be heard.
Once recording begins, the [ (Play/Stop)] button and the [ (Rec)] button indicators will light.
Go ahead and perform on the keyboard.
Stop recording
7
Press the [ (Play/Stop)] button.
Recording will stop, and the [ (Play/Stop)] button and the [ (Rec)] button indicators will go
out.
The recorded performance will be recorded on the [1/User] button.
Play back the recorded performance
8
Press the [ (Reset)] button, and then press the [ (Play/Stop)] button.
You will hear the recorded performance.
To stop the playback, press the [ (Play/Stop)] button once gain.
Track button assignments for the recorded performance
When you record only a keyboard performance, the performance will be assigned to the track buttons
as follows.
• Normal performance (playing a single sound from the entire keyboard)
The performance is recorded to the [1/User] button.
• Dual performance
The performance is recorded to the [1/User] button.
• Split performance
The left-hand performance is recorded to the [3/Left] button, and the right-hand performance to the
[4/Right] button.
• Dual performance and Split performance
The left-hand performance is recorded to the [3/Left] button, and the right-hand dual performance to
the [4/Right] button.
• Drum set or sound effect performance
The performance is recorded to the [R/Rhythm] button.
HPi-7_e.book 37 ページ ２００５年１月１８日 火曜日 午後４時３９分