Filter
Top Products
66
If this Message Appears on Screen
Indication
Meaning
PU
When a song with a pickup (a song
that does not start on the first beat)
is played back, the measure
numbers will be indicated in the
display as PU, 1, 2, and so forth.
00:
This data cannot be saved
in SMF format. You cannot
save on this floppy.
To protect the copyright, this
music file cannot be saved as an
SMF.
Also, the music file can not be
saved. If you want to save it,
please save on the same floppy
disk.
01:
You cannot save this data.
You can only read the music file. It
can not be saved on a floppy disk
or user memory.
02:
Write protected.
The protect tab on the floppy disk
is set to the Protect position (p. 6).
Change it to the Write position.
Repeat the procedure.
03:
This is a master disk.
This floppy disk cannot store the
format or save any data.
Insert a different disk and repeat
the procedure.
04:
Can’t save to this disk.
The data cannot be saved onto this
floppy disk because the format is
different. Use the floppy disk in
the same format.
05:
You can’t overwrite this
file.
A new song cannot be written on
this song. Select a different song
number or use a different floppy
disk, and repeat the procedure.
10:
No disk.
No floppy disk is connected to the
disk drive. Insert the disk
correctly, and repeat the
procedure.
11:
Disk or memory full.
There is not sufficient space left on
the floppy disk or User memory
for the data to be saved.
Insert a different floppy disk or
delete files on user memory, and
repeat the procedure.
12:
Disk is not formatted.
The floppy disk inserted into the
disk drive can’t be read. Be sure
you’re using Roland SMF Music
Files or other music files
compatible with Roland digital
pianos (p. 77). Also, if you want to
save your work on floppy disk,
you need to format the floppy disk
first (p. 41).
13:
Disk ejected while it was
being accessed.
The floppy disk was removed
from the disk drive while reading
or writing was in progress. Insert
the floppy disk and repeat the
procedure.
14:
Corrupt sector found on
disk or in memory.
This floppy disk is damaged and
cannot be used. Insert a different
disk and repeat the procedure.
15:
Can’t read this data.
Be sure you’re using Roland SMF
Music Files or other music files
compatible with Roland digital
pianos (p. 77).
16:
Playback is aborted.
The HPi-7 cannot read the floppy
disk quickly enough. Press the
[ (Play/Stop)] button, then
press the [ (Reset)] button and
[ (Play/Stop)] button to
play the song.
17:
The selected image data
cannot be displayed.
The selected image data cannot be
displayed. If it cannot be made to
appear either on the HPi-7’s
display or the external display,
you will need to prepare image
data that can be used with the HPi-
7 (p. 57).
30:
Can’t do this function.
Memory full.
Save the song on a floppy disk (p.
42) to delete the song data stored
on the HPi-7 memory.
40:
Buffer full.
The HPi-7 cannot deal with the
excessive MIDI data sent from the
external MIDI device. Reduce the
amount of MIDI data sent to the
HPi-7.
41:
MIDI cable disconnected.
A MIDI cable has been
disconnected. Connect it properly
and securely.
42:
Can’t record.
An excessive amount of
performance data has been sent to
HPi-7 in one time and therefore
could not be recorded.
51:
Memory error.
There is something wrong with
the system. Repeat the procedure
from the beginning. If it is not
solved after you have tried several
times, contact the Roland service
center.
Indication
Meaning
HPi-7_e.book 66 ページ ２００５年１月１８日 火曜日 午後４時３９分