Filter
Top Products
100
Effects List
This delay connects two delay units in series.
Adds modulation to the delayed sound.
Produces three delay sounds; center, left and right.
This effect has four delays.
This is a variation of delay in which four delayed sounds are heard.
This is a reverse delay that adds a reversed and delayed sound to the
input sound.
Adds a shuffle to the delay sound, giving the sound a bouncy delay effect
with a swing feel.
This applies a 3D effect to the delay sound. The delay sound will be
positioned 90 degrees left and 90 degrees right.
45:
SERIAL DELAY
Item
Value Description
Delay 1 Time
0–1300 msec, note
Delay time from when sound is
input to delay 1 until the delay
sound is heard
Delay 2 Time
0–1300 msec, note
Delay time from when sound is
input to delay 2 until the delay
sound is heard
Feedback
-98–+98%
Proportion of the delay sound that
is to be returned to the input of
delay (negative values invert the
phase)
Balance
D100:0W–D0:100W
Volume balance of the original
sound (D) and delay sound (W)
46:
MODULATION DELAY
Item
Value Description
Delay Time
0–1300 msec,
note
Adjusts the time until the delay sound is
heard.
Feedback
-98–+98%
Adjusts the amount of the delay sound that’s
fed back into the effect.
Negative (-) settings invert the phase.
Balance
D100:0W–
D0:100W
Volume balance between the direct sound
(D) and the delay sound (W)
47: 3TAP PAN DELAY
Item
Value Description
Delay Time
0–860 msec,
note
Delay time from the original sound until the
delay sound is heard.
Feedback
-98–+98%
Adjusts the amount of the delay sound that’s
fed back into the effect.
Negative (-) settings invert the phase.
Balance
D100:0W–
D0:100W
Volume balance between the direct sound
(D) and the delay sound (W)
48:
4TAP PAN DELAY
Item
Value Description
Delay Time
0–650 msec,
note
Adjusts the time from the original sound
until delay sounds are heard
Delay 1
Feedback
-98–+98%
Adjusts the amount of the delay sound that’s
fed back into the effect.
Negative (-) settings invert the phase.
Balance
D100:0W–
D0:100W
Volume balance between the direct sound
(D) and the delay sound (W)
49:
MULTI TAP DELAY
Item
Value Description
Delay Time
0–650 msec,
note
Adjusts the time until Delays are heard.
Delay 1
Feedback
-98–+98%
Adjusts the amount of the delay sound that’s
fed back into the effect.
Negative (-) settings invert the phase.
Balance
D100:0W–
D0:100W
Volume balance between the direct sound
(D) and the effect sound (W)
50:
REVERSE DELAY
Item
Value Description
Rev Dly
0–1300 msec, note
Delay time from when sound is
input into the reverse delay until
the delay sound is heard
Rev Dly Fback
-98–+98%
Proportion of the delay sound that
is to be returned to the input of
the reverse delay (negative values
invert the phase)
Balance
D100:0W–D0:100W
Volume balance of the original
sound (D) and delay sound (W)
51: SHUFFLE DELAY
Item
Value Description
Delay Time
0–2600 msec,
note
Adjusts the time until the delay sound is
heard.
Shuffle
Rate
0–100
Adjusts the ratio (as a percentage) of the time
that elapses before Delay B sounds relative to
the time that elapses before the Delay A
sounds.
When set to 100, the delay times are the
same.
Feedback
-98–+98%
Adjusts the amount of the delay that’s
feedback into the effect.
Negative (-) settings invert the phase.
52:
3D DELAY
Item
Value Description
Delay Time
0–860 msec, note
Adjusts the delay time from the
direct sound until the delay sound
is heard.
Center
Fback
-98–+98%
Adjusts the proportion of the
delay sound that is fed back into
the effect.
Negative (-) settings will invert
the phase.
Balance
D100:0W–D0:100W
Volume balance between the
direct sound (D) and the effect
sound (W)
JUNO-Di_e.book 100 ページ ２００９年６月２２日 月曜日 午前９時２３分