Filter
Top Products
63
Detailed Settings for Performance Functions
The D Beam controller can be used simply by waving your hand over it. It
can be used to apply various effects, depending on the function that is
assigned to it.
1.
Press either the D BEAM [SOLO SYNTH], [EXPRESSION], or
[ASSIGNABLE] button to turn on the D Beam controller.
2.
While you play the keyboard to produce sound, place
your hand above the D Beam controller and move it
slowly up and down.
An effect will be applied to the sound, depending on the function
that is assigned to the D Beam controller.
3.
To turn off the D Beam controller, once again press the
button you pressed in step 1 so the indicator goes out.
1.
Press one of the D BEAM [SOLO SYNTH], [EXPRESSION],
or [ASSIGNABLE] button so it’s lit.
The edit screen for the button you pressed will appear.
By holding down the [SHIFT] button and pressing one of the D
BEAM buttons, you can access the edit screen without
changing the D Beam controller’s on/off setting.
• “SOLO SYNTH” screen
fig.disp-solosynth.eps_70
• “EXPRESSION” screen
fig.disp-express.eps_70
• “ASSIGNABLE” screen
fig.disp-assign.eps_70
2.
Use the [
] [ ] buttons to move the cursor to the
item that you want to edit.
Using the D Beam Controller to
Modify the Sound
Button
Description
[SOLO SYNTH]
You can use the D Beam controller to play the JUNO-Di
like a monophonic synthesizer.
[EXPRESSION]
This button lets you use the D Beam controller to create
expressive changes in the volume.
[ASSIGNABLE]
You can assign various functions to be controlled by
the D Beam controller.
The usable range of the D Beam controller
fig.DBeamRange.eps
The diagram shows the usable range of the
D Beam controller. Waving your hand
outside this range will produce no effect.
When the D Beam controller is responding
to your movement, the D BEAM button
that had been lit will blink.
The usable range of the D Beam
controller will become extremely small when used under
strong direct sunlight. If it does not function as you
expect, adjust the sensitivity as appropriate for the
brightness of your location.
→ “Making Settings that are Common to the Entire
JUNO-Di (SYSTEM)” on “DBEAM SETTINGS” (p. 76)
D Beam Controller Settings
JUNO-Di_e.book 63 ページ ２００９年６月２２日 月曜日 午前９時２３分