Filter
Top Products
41
Chapter 7. Other Functions
MIDI
stands for Musical Instrument Digital Interface. It is a universal
standard that allows electronic musical instruments and computers
to exchange performance data. The SP-404 supports the MIDI
standard, and provides a MIDI IN connector. You can connect this
connector to another MIDI device to do a variety of things.
The SP-404’s
MIDI IN
connector receives MIDI messages from
another connected MIDI device.
The “MIDI Implementation Chart” (p. 51) provides an easy way
to check which MIDI messages the SP-404 is able to receive. You
can compare this chart to the MIDI implementation chart of
your other MIDI device to see which messages can actually be
sent by your other device and received by the SP-404.
To play the SP-404’s pads using an external MIDI device, transmit
the following note numbers.
You can change the MIDI channel by changing the
Pad Base
Ch
.
Here’s how to specify the channel (Pad Base Channel) on which you
can play the SP-404’s pads from an external MIDI device.
1.
Refer to the following table, and turn on the power while
holding down the pad that corresponds to the channel you
want to use.
This setting is remembered even after you turn off the power.
1.
While holding down [TIME/BPM], turn on the power.
The MIDI synchronization mode will appear in the display. The
MIDI synchronization mode determines how the SP-404
operates in synchronization with another device.
2.
Turn the CTRL 1 (TIME) knob to select the MIDI
synchronization mode.
With the factory settings, “Aut” is selected.
Using the SP-404 with Other
MIDI Equipment
About MIDI
MIDI on the SP-404
Note
Note#
MIDI Ch
Pad Base Ch Pad Base Ch + 1
A2#
46 (0x2E) EXT SOURCE
B2
:
A3#
47 (0x2F)
:
58 (0x3A)
[A] Pad 1
:
Pad 12
B3
:
A4#
59 (0x3B)
:
70 (0x46)
[B] Pad 1
:
Pad 12
B4
:
A5#
71 (0x47)
:
82 (0x52)
[C] Pad 1
:
Pad 12
[G] Pad 1
:
Pad 12
B5
:
A6#
83 (0x53)
:
94 (0x5E)
[D] Pad 1
:
Pad 12
[H] Pad 1
:
Pad 12
B6
:
A7#
95 (0x5F)
:
106 (0x6A)
[E] Pad 1
:
Pad 12
[I] Pad 1
:
Pad 12
B7
:
A8#
107 (0x6B)
:
118 (0x76)
[F] Pad 1
:
Pad 12
[J] Pad 1
:
Pad 12
Changing the MIDI Channel
(Pad Base Ch)
Channel
Display Pad
1
C. 1 1
: : :
12 C.12 12
13 C.13 HOLD
14 C.14 EXT SOURCE
15 C.15 SUB PAD
Synchronizing to an External MIDI
Device
MIDI syn-
chronization
mode
Explanation
“
Aut
”
(Auto Sync)
When MIDI Clock messages are received,
the SP-404 will automatically detect them
and synchronize to their tempo. MIDI
Start/Stop/Continue messages can be re-
ceived to start/stop pattern playback.
*
MIDI Start/Stop/Continue messages will
not be received during pattern recording.
“
tMp
”
(Tempo Sync)
When MIDI Clock messages are received,
the SP-404 will automatically detect them
and synchronize to their tempo. MIDI
Start/Stop/Continue messages will not be
received.
*
Choose this setting if you want to play the
SP-404’s patterns at the timing you choose
but in synchronization with a perfor-
mance sent from an external MIDI se-
quencer.
“
oFF
”
(Sync OFF)
MIDI Clock and Start/Stop/Continue mes-
sages will not be received.
*
Choose this setting if you only want the
SP-404’s samples to play in response to
Note messages received from your exter-
nal MIDI sequencer.
SP-404_e.book 41 ページ ２００６年３月３日 金曜日 午後２時４６分