Samson D2500 Musical Instrument User Manual


 
Copyright 2004 - 2005. Samson Technologies Corp.
Printed September, 2005 v1.2
Samson Technologies Corp.
575 Underhill Blvd.
P.O. Box 9031
Syosset, NY 11791-9031
Phone: 1-800-3-SAMSON (1-800-372-6766)
Fax: 516-364-3888
www.samsontech.com
Table of Contents
Introduction
2
D2500 Features
3
Controls and Functions
4
Front Panel Layout
4
Rear Panel Layout
5
D2500 Quick Start
6
SETTING UP THE D2500 to work in MANUAL mode
6
Operating the D2500
8
Navigating the D2500 Controls
8
GLobal
8
Selecting the Input
8
Selecting the Filter Bandwidth
9
Selecting the Fader Range
9
Selecting the Operating Mode
9
Using the Left, Right and Link Control Switches 1
0
Using the LINK switch 1
0
Controlling the Right Channel signal 1
0
Using the D2500 in MANUAL Mode 1
0
Working with the D2500 Faders 1
1
Using the Process Switches 1
2
Using the EQ section 1
2
Using the FEEDBACK Management Function 1
2
Using the Internal Noise GATE 1
3
Using the
Internal
DELAY 1
3
Setting up and Using the High Pass and Low Pass Filters 1
4
Using the Internal LIMITER for Basic Speaker Protection 1
5
Using the A/B Feature 1
5
Storing Programs in the D2500
1
6
Loading Programs in the D2500
1
6
Using the Load MASK function 1
6
MIDI and D Net
1
7
Setting the D2500 to Transmit and Receive MIDI 1
7
Setting the D2500 to Transmit and Receive Data Using D-Net 1
7
Selecting a MIDI Channel 1
7
Selecting MIDI Omni mode 1
8
Selecting MIDI Program Change 1
8
Operating the
D2500
with the D1500 RTA
1
9
- 23
System Configurations
2
4
- 26
Using the D2500 with Active Speakers 2
4
Using the D2500 with Passive Speakers 2
4
Using the D2500 in Insert Points 2
5
Using the D2500 for Mains and Monitors 2
5
Using Two D2500’s for Mains and Monitors 2
6
D2500 Wiring Guide
2
7
Specifications
2
8