Filter
Top Products
IMPORTANT SAFETY PRECAUTIONS
54 TASCAM DP-02/DP-02CF
2 – Advanced techniques
Empty Export Track You’re trying to export a track (“Importing and exporting tracks” on page 45) which doesn’t have
anything recorded on it. Pick another track to export.
File Not Found You’re trying to restore a song when there are no backed-up songs on the partition (“Backing up
and restoring songs” on page 44)—maybe you hit the ¥ cursor key by mistake, or you may want
to change the partition (“Selecting the active partition” on page 38).
I/O Too Short You are trying to enter repeat mode, but the time between the IN and OUT points is too short.
Make the time longer.
Import File Not Found You’re trying to import a WAV file from the FAT partition when there aren’t any WAV files there
(“Importing a track” on page 45). Connect the unit to a PC and transfer some files to the FAT
partition for import.
Import File Too Big You’re trying to import a WAV file from the FAT partition that is too big for the remaining space
on the partition. Free up some space on the (native) partition and try again.
In Bounce Mode You tried to perform an action that cannot be done while in Bounce mode (“Bouncing” on page
34).
In Master Mode You tried to perform an action that cannot be done while in Master mode (“Mixdown and
mastering” on page 27).
In Punch Mode You tried to perform an action that cannot be done while in Punch mode (“Punching recording”
on page 25).
In Repeat Mode You tried to perform an action that cannot be done while in Repeat mode.
Mark Full You tried to store more than 999 location marks in a song (“Location marks” on page 29).
Delete some location marks and try again.
Master Track Not Found You’ve tried to export a mastered mix track (“Exporting the mastered stereo tracks” on page 47)
when the song doesn’t have one. Master the song and then export the mix.
Master Track Too Big You tried to export a master track which was too big for the remaining space on the FAT parti-
tion (“Exporting the mastered stereo tracks” on page 47). Connect the unit to a computer and
free up some space on the FAT partition.
No Armed Track You’re trying to set up auto-punching with no tracks armed (“Punching recording” on page 25).
Arm a track or tracks and try again.
No Disk Space You tried to create a song, but there’s not enough space on the partition to create a song (
“Creating a new song” on page 21). Free up some space and try again.
No Locate Mark You’re trying to edit the location mark list (“To edit a location mark” on page 29) when no loca-
tion marks have been set.
No Master Trk You’ve tried to use a non-existent master track as the source in a track cloning operation (
“CLONE TRACK” on page 51). Select another source or master the song and try again.
No Redo Histry There’s nothing for you to redo (nothing’s been undone). See “Undoing/Redoing an operation”
on page 25.
No Song You’re trying to load a song from a partition that has no songs on it (“Loading a saved song” on
page 22). Change partitions (“Selecting the active partition” on page 38).
No Undo Histry There are no actions to be undone. See “Undoing/Redoing an operation” on page 25.
Not Stopped The transport is moving (not stopped, but playing back, recording, etc.) and you’ve pressed a key
such as the BOUNCE key which cannot be used until you press STOP.
Now Recording You’re trying to perform an action which cannot be done while recording.
Same Track You can’t clone a track to itself. “CLONE TRACK” on page 51.
Song protected Song Protected The song is protected (“Protecting a song” on page 42) and you are trying to
change it (record or edit, etc.). Unprotect the song.
Too Many Songs You have 250 songs on one partition. You must delete some before you can create another song.
Track Full You’re trying to import a file from the FAT partition to a track that has already been recorded to
(“Importing a track” on page 45). You can only import to a blank track.
Trk too short You’re trying to master with the OUT point at the zero position (“Mixdown and mastering” on
page 27). Set the OUT point (“IN and OUT marks” on page 30) and try again.
Messages
The following popup messages alert you to conditions that
may arise while you are using the unit. Consult this table if
you see something you don’t understand: