Tascam DP-02CF Musical Instrument User Manual


 
IMPORTANT SAFETY INSTRUCTIONS
TASCAM DP-02/DP-02CF 67
4 – DP-02 Appendix
On the DP-02, a song’s master stereo track can be written
to a CD-R or CD-RW (see “Mastering” on page 27), and
this master recording can be burned to CD for audio CD
playback.
There are two ways of making a CD:
Disk At Once (simply called “DAO” from here on)
Track At Once (simply called “TAO” from here on)
In the DAO recording, master stereo tracks recorded on the
DP-02 are written all at once.
DAO finalized the disc when it’s finished (see “Finalizing
CDs” on page 68), making the CD compatible with other
CD players immediately after writing by DAO has ended.
With DAO, additional tracks cannot be written to the CD
because it creates a finalized disc.
In the TAO recording, master stereo tracks recorded on the
DP-02 are written to the CD on a track-by-track basis.
If you want to write tracks to a CD over several sessions,
choose the TAO recording.
Since TAO does not finalize the CD, this CD cannot be
played back on a regular CD player (it can be played on the
DP-02).
After all of the desired master stereo tracks have been
written by TAO, finalize the disc (“Finalizing CDs” on
page 68).
Additional tracks cannot be written to the CD after final-
ization has ended.
Making an audio CD
Writing by Disk At Once (DAO)
With DAO, the track order can be set when writing two or
more tracks.
A silent gap of any desired length can also be added
between tracks.
1. Insert a blank CD-R or an erased CD-RW into the
slot.
2. Press the CD key to bring up the MASTER WRITE
menu and enter.
3. A list of songs that have master tracks is displayed.
An asterisk (Ú) is displayed to the right of a song to
show the current song.
Use the cursor (§/) keys to select a song and rotate
the DATA dial clockwise to confirm the song to write
to the CD. A “ ” mark appears on the check box.
Repeat this action for multiple selection.
To deselect the selection, highlight the song and
rotate the DATA dial counterclockwise. The check
mark disappears.
4. When you have decided on the songs to write, press
the YES/ENTER key.
In this screen, you can set the order in which the
master stereo tracks are to be written to the CD.
5. Select the song whose order is to be changed using
the §/ keys or DATA dial, and press the ˙ key to
bring up the following display:
Use the cursor (§/) keys or DATA dial to change
the order of the song. The selected song moves up or
down with the mark ( ) at the head of the song title.
When there are two or more songs whose order is to
be changed, repeat this operation.
When you have changed the song order, press the
YES/ENTER key. The display returns to the WRITE
SONG LIST.
6. In the WRITE SONG LIST screen, press the ¥
cursor key. The screen for setting the gap between
songs is displayed.