Filter
Top Products
same location. “Normal store” is used if you want to
change preset location and maybe the name as well.
Quick store
- press and hold STORE for 2 seconds. The
preset is now stored at the current location.
If you are trying to store a factory preset using
“Quick store”, you will automatically be directed to
“Normal store” mode.
Normal S
tore - press STORE once:
Now the following controls are available:
- Encoder A selects preset location
- Encoder B selects preset name characters
- Encoder C changes characters
- Encoder D selects recall, delete or store mode
When selections are made press STORE to confirm.
8 - Levels
Output levels can be set for each preset. All other
parameters in the levels menu are “global” parameters
and do not change with presets.
9 - Menu
This menu holds important settings such as MIDI,
routing, pedal settings and utility parameters. Please
refer to the relevant manual sections for details.
10 - LEDs
The LEDs indicate the selected effect in each block.
11 - Comp
On/off switch for the compressor.
12 - Mod
On/off switch for the modulation block.
11+12
Press both switches at the same time to go up one bank.
13 - Delay
On/off switch for the delay block.
14 - Reverb
On/off switch for the reverb block.
15+16
Press both switches at the same time to go down one
bank.
15 - Preset 1
Press to recall preset #1 in the current bank.
16 - Preset 2
Press to recall preset #2 in the current bank.
17 - Preset 3
Press to recall preset #3 in the current bank.
18 - Boost / Tap Tempo / Hold for Tuning
Via the footswitch parameter in the utility menu this
switch can be set to act as either boost or tap tempo.
With the “Boost” function selected the entire signal can
be boosted up to 10 dB. Max boost level is set via the
levels menu. The boost level can be set for individual
presets within the set max boost.
With “Tap Tempo” selected, the global tempo can be
entered by tapping the switch.
Whether you are using tap tempo mode or boost mode
for this switch the tuner mode can be accessed by
pressing the switch for 2 seconds. In Tuner mode
G-Natural can be set up to mute the outputs for
convenient quiet tuning. This is setup in the Utility menu
via the Output parameter.
OPERATION
8