Filter
Top Products
19
MENU - UTILITY
Utility
Basics
• Press MENU to access
• Select Utility using encoder D
• Press MENU to confirm
• Set values using encoders A, B and C
• Change pages using encoder D
FX Mute
The FX Mute parameter determines how the Reverb and
Delay effects should act when changing between presets
and when bypassing one of these effects.
Sof
t:
Delay and Reverbs will “ring out”
Hard:
Delay and Reverbs will mute.
Tap Master
A preset holds both a subdivision parameter that relates
to the global tapped tempo and also a fixed delay time.
The tap tempo master parameter defines how G Natural
responds to the global tapped tempo at preset change.
Preset:
With Tap Master in Preset mode the delay repeats will
play according to the delay time stored with the preset.
As soon as you tap, maybe to make a slight correction,
the tapped tempo plays according to the set subdivision.
T
ap:
With Tap Master in Tap mode the current tapped global
tempo and the set sub-division applies instantly at preset
change.
Boost Lock
Range: On or Off
When Boost Lock is set to “on” you will be able to boost
the amount of dB specified by the Boost Max. parameter
on ALL presets.
EQ Lock
Range: On/off
When EQ is locked the current EQ will be used on ALL
presets.
Routing Lock
Range: On/off
If you always use the same routing you may prefer to
lock the current routing.
Factory Bank Lock
Range: On/off
G-Natural comes with a selection of factory presets to
show the many different sounds and effects you can
create with G-Natural. However, as you begin you create
you own bank of presets you may prefer not to be able to
select factory sounds in a live situation. In that case set
Factory Bank Lock to “on”. You will then NOT scroll
through factory banks when you use the bank up/bank
down functions.
Footswitch
Range: Boost or Tap Tempo
Determines the function of the BOOST/TAP TEMPO
switch. This switch can be set to act as either boost
on/off or as tap tempo.
View Angle
Adjust to get the best display viewing angle.
Clear System
Clear system will set G-Natural back to factory default
settings. - Press MENU to execute and confirm.