Filter
Top Products
MENU - PEDAL
18
Master
If an expression pedal is connected to the pedal input
and a preset is recalled, G-Natural can be set up to
respond to either the current position of an expression
pedal or to the value stored with the preset.
Preset:
The parameter value stored as part of the preset
applies – regardless of the current position of the
expression pedal.
Pedal:
The position of the expression pedal is identified
at the moment of preset change, and the value stored as
part of the preset is discarded.
Calibrating
In order to secure the best performance of your
expression pedal, G-Natural must be calibrated to this
pedal. Follow this step by step guide.
• Make sure that you have connected your pedal to the
pedal connector on the rear panel
• Select “Calibrate from the Pedal Menu
• Press MENU
• The LCD now reads
• Place your pedal in minimum position (“Heel down”)
and press MENU
PEDAL CALIBRATE
Set Min: 0 <menu>
PEDAL MENU
CALIBRATE <menu>
• The LCD now reads
• Place your pedal in maximum position (Toe down)
and press MENU
• The LCD reads: “CALIBRATION DONE”
PEDAL CALIBRATE
> CALIBRATION DONE <
PEDAL CALIBRATE
Set Max: 0 <menu>