15
PARAMETERS
14
PARAMETERS
Dotted or Triplets
Press these buttons to set the grid to
either dotted or triplet notes.
1166 –– PPaarraammeetteerr RRaannddoommiizzaattiioonn mmeennuu
Use this drop-down menu to select one or more delay parameters to randomize.
1177 –– GGOO!! ((AAccttiivvaattee rraannddoommiizzee ))
Press “GO!” to activate the randomize feature.
With the randomize feature a given set of parameter values can be randomized.
1188 –– DDeellaayy GGrriidd sseettttiinnggss
Delay taps can be set at random or in a grid. A grid consists of a simple sub-division,
such as 1/4, 1/8 etc., or a sub-division combined with a “dot” or “triplet” value.
1199 ––
DDeellaayy FFoorrmmaatt:: BBPPMM oorr mmiilllliisseeccoonnddss
The tempo can be indicated in beats per minute (BPM) or milliseconds. If you change the
delay format from milliseconds to BPM, the delay time for each tap will be quantized
according to the selected grid. If you do not want this, simply click the UNDO button.
2200 –– TTeemmppoo SSyynncc oonn//ooffff
When you set this parameter to “On”, the plug-in’s tempo will be synchronized to the
host tempo. If you set it to “Off”, its tempo can be set independently from the host.
2211 –– TTeemmppoo iinnddiiccaattoorr
The tempo is displayed either in BPM or milliseconds. If you set the Tempo Sync
parameter to “On”, this field will always indicate the current tempo of the song. When
Tempo Sync is set to “Off”, the tempo of the Tap Factory can be entered directly here.
Click on the small up/down arrows to increase or decrease the tempo in 1 BPM steps.
2222 –– TTaapp PPaadd ((ffo
orr TTeemmppoo oorr RRhhyytthhmm ttaapp))
Depending on the selected Tap mode (see 24) you can enter either the global tempo or
a rhythm by tapping this button.
2233 –– ZZoooomm FFaaccttoorr bbuuttttoonnss
Zoom tool for the grid allows you to zoom and do fine adjustments.
2244 –– TTaapp MMooddee
T
empo mode:
In Tempo Mode, you can enter the global delay tempo by rhythmically clicking (tapping)
the Tap Pad. Typically you will tap the tempo in quarter notes. Tapping two times is
enough, but tapping more times will increase the accuracy (as Tap Factory calculates the
tempo as the average of
all
the taps, not just the last two).
Rhythm Mode
:
In Rhythm mode you can enter delay taps as a rhythm.
The restrictions are that you can set a maximum of 24 taps within 9 seconds.
2255 –– TToooollss
Three different tools are available for setting and adjusting parameter values directly in
the tap display. One tool is always selected. To switch between the tools, simply click one
of the three icons.
S
election tool: This is the default selection tool. Use it to select a single delay tap
by clicking on the tap. To select
multiple
taps, press and hold the left mouse
button and drag the tool around several delay taps.
C
rosshair tool: This tool can be used to adjust parameter values by drawing
straight lines in the tap display.
F
reehand tool: This tool can be used to draw parameters freely in the tap display.