VIZIO VHT510 User Manual
10
www.VIZIO.com
Wired Connection to an iPod Dock (not supplied by VIZIO)
1. Turn off power to your Sound Bar and the MP3 Player.
2. Connect one end of the audio cable to the analog audio output on the MP3 player docking
unit.
3. Connect the other end of the audio cable (white and red connectors) to the IN jacks on your
Sound Bar.
4. Turn on the power to your Sound Bar and MP3 Player.
5. Select the associated input by pressing IN on the top of your Sound Bar.
Notes:
The iPod and Play/Pause/Previous/Next buttons on the remote control only control a VIZIO-branded
iPod dock and will not control a 3rd party iPod dock or MP3 player.
Most MP3 players commonly use a 1/8” Stereo Mini-Jack. In this case, use a 1/8” stereo mini-jack-to-
RCA (AV) cable (sold separately).
If wall mounting of your Sound Bar System is planned, purchase a right-angle RCA cable to avoid
mounting interference.
Refer to your MP3 Player user manual for more information about the audio output settings and
connections of the product.
CAUTION: Do not connect the MP3 Player headphone output directly to your Sound Bar. This can result
in damage to the devices. A docking unit or equivalent conversion unit is required to adapt line level audio
to your Sound Bar.