Vizio VHT510 DJ Equipment User Manual


 
VIZIO VHT510 User Manual
2
www.VIZIO.com
Important Safety Instructions
Your Sound Bar is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent your Sound Bar from being damaged, the
following rules should be observed for its installation, use, and maintenance. Please read the
following safety instructions before operating your Sound Bar. Keep these instructions in a safe
place for future reference.
To reduce the risk of electric shock or component damage, switch off the power before connecting
other components to your Sound Bar.
Unplug the power cord before cleaning your Sound Bar. A damp cloth is sufficient for cleaning. Do not
use a liquid or a spray cleaner on your Sound Bar. Do not use abrasive cleaners.
Always use the accessories recommended by the manufacturer to insure compatibility.
When moving your Sound Bar from an area of low temperature to an area of high temperature,
condensation may form in the housing. Wait before turning on your Sound Bar to avoid causing fire,
electric shock, or component damage.
A distance of at least 3 feet should be maintained between your Sound Bar and any heat source,
such as a radiator, heater, oven, amplifier etc. Do not install your Sound Bar close to smoke.
Operating your Sound Bar close to smoke or moisture may cause fire or electric shock.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure
reliable operation of your Sound Bar and to protect it from overheating, be sure these openings are
not blocked or covered. Do not place your Sound Bar in a bookcase or cabinet unless proper
ventilation is provided.
Never push any object into the slots and openings on your Sound Bar enclosure. Do not place any
objects on the top of your Sound Bar. Doing so could short circuit parts causing a fire or electric
shock. Never spill liquids on your Sound Bar.
Your Sound Bar should be operated only from the type of power source indicated on the label on the
AC/DC Adapters. If you are not sure of the type of power supplied to your home, consult your dealer
or local power company.
Only power of the marked voltage can be used for your Sound Bar. Any other voltage than the
specified voltage may cause fire or electric shock
The power cord must be replaced when using different voltage than the voltage specified. For more
information, contact your dealer.
Your Sound Bar AC/DC Adapters are equipped with a three-pronged grounded plug (a plug with a
third grounding pin). This plug will fit only into a grounded power outlet. This is a safety feature. If
your outlet does not accommodate the three-pronged, have an electrician install the correct outlet, or
use an adapter to ground your Sound Bar safely.
Do not defeat the safety purpose of the grounded plug.
When connected to a power outlet, power is always flowing into your Sound Bar. To totally disconnect
power, unplug the power cord.
The lightning flash with arrowhead symbol within an equilateral triangle is intended
to alert the user to the presence of un-isolated, dangerous voltage within the inside
of your Sound Bar that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and servicing instructions in the
literature accompanying your Sound Bar.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
The wall socket should be located near your Sound Bar and be easily accessible.