VIZIO VHT510 User Manual
6
www.VIZIO.com
Wall Mounting your Sound Bar
Your Sound Bar can either be kept on the stand or mounted on the wall. If you choose to mount your
Sound Bar on the wall, follow the instructions below for removing the stand.
1. Remove the stands from their original configuration as shown in Figure 1.
2. Flip the stand over and re-attach to your Sound Bar as shown in Figure 2.
3. Connect Audio and Video Cables to your Sound Bar (see Connecting Equipment on page 15
for detailed steps).
4. Connect the power cord to the power cord connector on the back of your Sound Bar.
5. Mark and drill holes in the desired location. Use anchors (not included) if you are not drilling
into studs.
6. Insert screws (not included), leaving room for your Sound Bar stands.
7. Hang your Sound Bar on the screws.
Caution:
Make sure that there are no electrical cables hidden behind walls before you begin to drilling.
If wall mounting of your Sound Bar is planned, purchase a right-angle RCA cable to avoid
mounting interference.
Figure 1 Figure 2
Wall Mounting the Satellite Speakers
The satellite speakers can either be placed on a stand or table or they can be mounted to the wall. You
have two options for mounting your satellite speakers to the wall: keyhole or threaded insert. Follow the
instructions included with the speaker mount bracket (not included) to hang your satellite speakers on a
wall.