Filter
Top Products
VIZIO VHT510 User Manual
Version 5/25/2010 17
www.VIZIO.com
Chapter 6 Maintenance and Troubleshooting
Maintenance
Important
Make sure that the power cables are removed from the back of your Sound Bar or Sub-Woofer
before cleaning.
Do not use volatile solvent (such as toluene, rosin and alcohol) to clean your Sound Bar or Sub-
Woofer. Such chemicals may damage your Sound Bar or Sub-Woofer housing.
Cleaning the Housing and Remote Control
Use a soft cloth for cleaning.
If the housing is seriously contaminated, use a soft cloth moistened with diluted neutral cleaner to
clean the display. Wring water out of the cloth before cleaning to prevent water from penetrating
into the housing. Wipe the housing with a dry cloth after cleaning.
Pairing
Your Sound Bar operates in unison with the Wireless Subwoofer and they come paired from the factory.
Follow the procedure below if pairing is needed:
1. Connect cables to your Sound Bar (see Connecting Equipment on page 15 for detailed
steps).
2. Connect the power adapter to the back of your Sound Bar and the power cord to the back of
the subwoofer and then plug them into a wall outlet.
3. Turn on your Sound Bar and subwoofer.
4. Pair and link the subwoofer to your Sound Bar, following the steps in the table below:
a. First pair the subwoofer and your Sound Bar.
b. Then, link the subwoofer to your Sound Bar (select your Sound Bar as the source of
audio).
Desired
Action
Subwoofer Sound Bar
Button
Action
LED Display Subwoofer Action Button Action
LED
Display
Sound Bar
Action
Pair
Wireless
Devices
Press for
more than 5
seconds
Starts flashing
slowly (after
flashing fast)
Subwoofer starts
pairing mode
Press INPUT for
more than 3
seconds
Link
LED
flashes
fast
Sound Bar
is in pairing
mode
Link
Subwoofer
to Sound
Bar
Press and
hold for 1 to
3 seconds
Begins flashing
fast
Subwoofer selects
Sound Bar as
audio source
N/A N/A N/A