Filter
Top Products
VIZIO VHT510 User Manual
16
www.VIZIO.com
Dolby and SRS LEDs—
LED
Color
Position 1 Position 2 Position 3
Blue
Dolby Digital signal is detected
SRS TruSurround HD enabled
(best for movie/TV content)
SRS TruVolume
Enabled
Orange
DTS signal is detected
SRS WOW HD enabled (best
for music content).
N/A
Off
No Digital Audio input
decoding
No SRS Processing
SRS TruVolume
Disabled
Flashing
N/A N/A N/A
Sound Bar Modes
Your VIZIO Sound Bar has two modes: Hub Mode and Client Mode. Use the switch on the back of your
Sound Bar to set the mode. See Sound Bar Connections on page 7 to see the location of the switch.
Hub Mode
If you have only one Sound Bar, set the switch to Hub mode. If the switch is in Client mode, your Sound
Bar will not be able to communicate with the subwoofer.
Client Mode
If you purchase additional products with VIZIO HD Wireless Audio technology in the future, consult those
user manuals for the best way to wirelessly connect them to your Sound Bar. Your Sound Bar should only
be operated in Client Mode if recommended by the accessories user manual.
Hub/Client Mode LEDs—
Lights blue when your Sound Bar is in Client Mode.
Lights orange when your Sound Bar is in Hub Mode.
Flashes slowly when your Sound Bar cannot find a suitable network (as a Client) or is the only
device currently in the network (as a Hub).
Flashes quickly when your Sound Bar is pairing. For a Hub device, pairing overrides the link
state and your Sound Bar may indicate that is it pairing even if it is already connected with other
devices in the network.