Filter
Top Products
10
Getting connected cont.
VIDEO CONNECTIONS
Connecting to a TV or video mixer with an RCA Connection
When connecting to the RCA (yellow) video input on a TV or video mixer, the DVG-909K gives you the option of outputting
both disc players independently (Fig.A) or together through the Switched Video Output (Fig.B).
Connecting each disc player independently (Fig. A)
Connect your RCA (yellow) video cables to the yellow RCA VIDEO outputs on each disc player (TRAY A and TRAY B). Then
connect them to the RCA (yellow) video inputs on your TV or video mixer. See figure A.
NOTE: Depending on the TV or video mixer, the video input jacks may be labeled AV 1, AUX, VIDEO 1/2/3, etc.
NOTE: If your TV only has one yellow RCA video input, it is recommended that you use the DVG-909K’s switched video
output.
Connecting the disc players together using the Switched Video Output
(Fig. B)
Connect your RCA (yellow) video cable to the yellow RCA Switched Video Output on the rear panel of the DVG-909K. Then
connect the other end of your RCA cable to the video input on your TV or video mixer. See Figure B.
NOTE: When using the Switched Output, the DVG-909K will automatically switch the audio output to the active disc player
A or B.
B
RCA/S-Video
KJ-7800 PRO
LTV-5
(Fig. A) (Fig. B)
VIDEO
MIXER
LTV-5