Filter
Top Products
8
Getting connected
AUDIO CONNECTIONS
The DVG-909K can be used as both a home entertainment DVD player and a Karaoke player/mixer. Since DVD audio is
optimal with a digital connection (especially if you have an AC-3 or DTS receiver), it is common for the audio connection to
be either Coaxial or Digital.
Karaoke, on the other hand, requires an analog audio connection in order to output a mixed microphone signal along with
the audio source. This would mean that one would need BOTH a digital audio and analog audio connection in order to
enjoy both DVD quality audio AND Karaoke entertainment. Below are instructions for connecting to both analog and digital
devices.
Connecting both Analog and Digital Audio
To do this you will need a Dolby D
igital DTS/AC-3 receiver with analog audio inputs. Refer to the instructions below for
each connection.
Connecting to a Dolby Pro Logic Amplifier
Using six RCA patch cables, connect the plugs from one side of the cables to the FL, FR, CENTER, SL, SR and SW outputs
on the DVG-909K. Connect all the plugs from the other side to the FL, FR, CENTER, SL, SR and SW inputs on your Dolby
Pro Logic amplifier.
Analog and Digital
SL SR CENTER L R COAXIAL S-VIDEO OPTICAL
SUB Y Cb Cr VIDEOFRFL
Amplifier
SL SR CENTER L R COAXIAL S-VIDEO OPTICAL
SUB Y Cb Cr VIDEOFRFL
DTX-9900K
DTX-9900K