VocoPro DVG-909K Karaoke Machine User Manual


 
19
1. EJECT button - Opens and closes the disc tray
2. DISPLAY panel - Displays graphical information on the DVG-909K’s operating status
3. DIRECT TRACK ACCESS buttons – These buttons allow for DIRECT TRACK selection.
4. DIRECTIONAL/ENTER buttons - These buttons allow you to navigate through the DVD menu screens, Setup Pages,
and MP3 menus. When viewing a photo from a PHOTO-CD, you can rotate the picture using these directional buttons.
5. SETUP button - This button opens up the on-screen Preferences pages. Use the directional buttons to navigate
through these pages and the ENTER button to make selections and changes.
6. DECK A-B LED indicators – These LED indicators display which DECK is currently active.
7. PLAY / PAUSE button – This button is used to initiate disc PLAYBACK when a disc is paused or stopped and PAUSE
a disc when it is playing.
8. STOP button - This button stops disc playback.
9. PREV/NEXT buttons - Use the buttons to skip backwards to the previous track or forwards to the next track. PREV
skips backwards to the previous track and NEXT skips forwards to the next track.
10. B-SCAN/F-SCAN buttons - Use these buttons to rewind and scan forwards within a song. B-SCAN rewinds the
song and F-SCAN scans forwards within a song.
11. PBC button - The PBC (play back control) button toggles the PBC mode ON/OFF. When in PBC mode, you can
direct access tracks/scenes by using the NUMBER PAD.
12. MUTE button - This button mutes the music that is currently playing.
13. AUDIO button - These buttons will cycle between three AUDIO playback modes: STEREO L/R, MONO L/L and
MONO R/R. In STEREO mode, audio playback is standard L/R audio. In L/L mode, the right channel is removed, and
replaced with a duplicate left channel. In R/R mode, the left channel is removed, and replaced with a duplicate right
channel.
NOTE: The L/L and R/R audio modes are used to manipulate the vocal layers on multiplexed karaoke media.
14. DIGITAL KEY CONTROL - These buttons direct the DIGITAL KEY CONTROLLER to shift the KEY of the SOURCE
MUSIC either UP or DOWN.
# - Raises the musical key a half step each time it is pressed.
- Resets the musical key to it’s original key.
b - Lowers the musical key a half step each time it is pressed.
15. OSD - Toggles between the different on-screen time displays.
SINGLE ELAPSED - How much time has passed on the current song
SINGLE REMAIN - How much time is left on the current song
TOTAL ELAPSED - How much time has passed on the current disc
TOTAL REMAIN - How much times is left on the current disc
OFF - Turns off the On Screen Display
16. S-MODE button - Turns SINGLE mode on and off. When SINGLE mode is on, the player will stop playing when the
current track is finished.
17. POWER ON/STANDBY button - Use this button to turn the DVG-909K ON or put it in STANDBY mode. In order
for this button to turn the unit on, the MASTER POWER switch on the rear panel of the player must be set to the ON
position.
18. TRAY SELECT button - Use this button to switch between disc tray A and disc tray B. The deck LED indicator (#4)
will indicate which disc tray is currently active.
External controller functions
9
8
1
2
3
4
5
6
7
10
11
12
13
14
15
16
17
18
External Controller