Filter
Top Products
18
Operations
Customizing Digital Echo settings (See Figure 1)
When using Digital Echo, you can customize the
effect by adjusting the ECHO, REPEAT and DELAY
controls. First set the ECHO level control to 5. Then
customize the effect with the REPEAT and DELAY
level controls. REPEAT adjusts the interval repetition
of the echo effect. As more REPEAT is applied, more
echo intervals will be heard when using it and vice
versa. DELAY adjusts length of each interval. As
more DELAY is applied, there will be more “space”
between the starting and ending point of each echo.
When the Digital Echo effect is customized, adjust
the ECHO level control as you would a master level
control.
Setting the Digital Reverb (Figure 2)
The KJ-7808RV allows you to set the amount of
reverb that is present in the microphone signal. Turn
the REVERB LEVEL control clockwise to increase
the amount of reverb and counter-clockwise to
decrease it.
Setting the Overall DSP Effect Level (Figure 3)
Each mic channel has a DSP EFFECT control which
allows you to adjust how much of the DSP effects
(echo and reverb) is present in each channel. Turn
the DSP EFFECT control clockwise to increase the
effect and counter-clockwise to decrease it.
(Figure 1)
INCREASE
DECREASE
(Figure 2)
INCREASE
DECREASE
INCREASE
DECREASE
(Figure 3)