Filter
Top Products
21
Setting the Mic Aux Send for Each Mic Channel
When running a vocal effects unit through the effects loop,
you can select which mic channels will be assigned to the
effects unit and which ones will bypass it using the MIC AUX
SEND button. Each MIC AUX SEND button has a number next
to it that corresponds with the mic channel that it will Assign/
Bypass.
• To assign a channel to the effects loop, press the MIC
AUX SEND button for that channel down
• To bypass the effects loop, depress the MIC AUX
SEND button for that channel.
Adjusting the Effects Loop Send and Return Levels
The KJ-7808RV allows you to adjust the Send and Return
levels of the effects loop.
SEND - is the clean microphone signal that goes into the
effects unit.
RETURN - Is the microphone signal with effects applied to it.
• Turn each control clockwise to increase and
counter-clockwise to decrease
Operations