Filter
Top Products
Making Global and Other Important Settings — Function
133
CVP-205/203
Changing the Touch Sensitivity and Transpose — Keyboard/Panel
Keyboard Touch
The Touch feature lets you control the volume of the voices by your playing strength. These settings allow you to
customize the keyboard’s touch response (sensitivity) to your personal playing preferences.
Transpose Assign
This determines which aspect of the instrument is affected by the [TRANSPOSE] button.
HARD 2
Requires strong playing to produce
high volume. Best for players with a
heavy touch.
HARD 1
Requires moderately strong playing for
higher volume.
NORMAL
Standard touch response.
SOFT 1
Produces high volume with moderate
playing strength.
SOFT 2 Produces relatively high volume even
with light playing strength. Best for
players with a light touch.
Determines the
Touch sensitivity
setting (refer to the
table at right).
Determines the
fixed volume level
when Touch is set
to “OFF.”
Determines whether touch is on or not for the corresponding parts.
The TOUCH setting affects all voices globally. Keep
in mind that you can set each voice to a different
touch sensitivity (TOUCH SENSE). For example, to
play a pipe organ voice most authentically, you can
set this so that the voice is not affected by touch
(page 90).
KEYBOARD
For this setting, Transpose affects the pitch of the
keyboard-played voices (Main, Layer, and Left) and
the accompaniment styles.
SONG
For this setting, Transpose affects only the pitch of
the songs.
MASTER
For this setting, Transpose affects the pitch of the
entire instrument (keyboard voices,
accompaniment styles, and songs).
Transpose
Allows you to shift the pitch of the keyboard-played voices,
accompaniment style playback, and song data in semitone
units.
1
Press one of the [TRANSPOSE] buttons.
2
A TRANSPOSE pop-up window, selected via
TRANSPOSE ASSIGN, appears.
3
Adjust the value by using the [TRANSPOSE] buttons.
Close the TRANSPOSE windows by pressing the
[EXIT] button.
• Selectively Transposing Keyboard/Song
These settings can be used to match both the song and your
keyboard performance to a certain key. For example, let’s
say you wish to play and sing along with a certain recorded
song. The song data is in F, but you feel most comfortable
singing in D, and you are accustomed to playing the
keyboard part in C. To match up the keys, keep the Master
Transpose setting at “0,” set the Keyboard Transpose to “2,”
and set Song Transpose to “-3.” This brings the keyboard part
up in pitch and the song data down to your comfortable
singing key.
TRANSPOSE
RESET
END
The transpose function
does not affect the Drum
Kit or SFX Kit voices.