Filter
Top Products
44
Drum Kit Voice Edit Mode
2-4. Hold Mode
Sets the Hold Mode for the voice (layer 1, 2) delivered by input
source q.
q IN (Input Source)
Assigns the input source for the setting. (Refer to P. 40)
w Hold Mode
on: Each time the pad is hit either a MIDI key on or MIDI key
off event will be transmitted in succession.
off: Normal operation. When a pad is hit, only a MIDI key on
event will be transmitted (after the decay time is up, key off
will be transmitted automatically).
* If this function is set to “on”, it is recommended that you use the
“key=high” setting in [2-3. Alternate Group, Key Assign Mode]
(P. 43).
2-5. Key Off Enable
This function decides whether or not to recognize MIDI key off
messages for the voice (layer1, 2) delivered by the input source
q.
q IN (Input Source)
Assigns the input source for the setting. (Refer to P. 40)
w Key Off
enable: Recognizes key off.
disable: Does not recognize key off.
* When this function is set to “disable”, some voices may sound
continuously. Press the [SHIFT] plus [VOICE] buttons to stop
voices sounding.
2-6. Function
Along with the voice, this function can be used to control other
functions w according to the trigger from the input source q.
q IN (Input Source)
Assigns the input source for the setting. (Refer to P. 40)
w Func (Function)
Selects the function that is controlled by the trigger input.
normal:Normal operation.
pad song: Controls playback of the pad song*.
click onoff: Switches the click sound on/off.
inc drumkit: Increases the value of the drum kit number by 1
(increment).
dec drumkit: Decreases the value of the drum kit number by
1 (decrement).
trig bypass: Switches the trigger bypass function on/off
(P. 28).
start/stop: Controls playback of the main song*.
main song: The main song is the selected in the Drum Kit Play
mode, and is controlled from the panel (of MIDI/TO HOST jack).
pad song: According to this setting, playback of the pad song will
be controlled by the trigger input. The pad song can be played
independently of the main song. Also, up to 3 pad songs can be
played along with main song simultaneously.
* Refer to the [2 -7. Pad Song] for more information on setting the
Pad Song.
* When 3 pad songs have already been selected in another input
source, the “pad song” will not be displayed (“------” is dis-
played).
2-7. Pad Song
This function contains settings for the pad song.
These settings are affective when a trigger from the input source
q, which is set in [2-6. Function], controls playback of the pad
song.
q IN (Input Source)
Assigns the input source for the settings (Refer to P. 40).
w Song Number
Assigns the song number (1-127) that is assigned to the pad song.
e Repeat Playback
rp: Repeats playback of the song (when the song reaches the end
it will start again from the beginning, continuously).
--: Normal playback.
r Playback Mode
play: When a pad is hit, playback of the assigned pad song will
start/stop.
chse: When the pad is hit, one measure of the assigned pad song
will start playback then pause.
ctof: When the pad is hit, playback of the assigned pad song will
start/stop. However, if the pad song is set to “ctof” the
pad song will stop when another pad song with the “ctof”
setting is started. This function allows only one “ctof”
pad song to be played at a time.
KIT IN=pad 1
Hold Mode= off
w
KIT IN=pad 1
Key Off= disable
w
q
KIT IN=pad 1
Func= normal
w
KIT IN=pad 1
Song= 1=--=play
w e r
q
q
q