Filter
Top Products
MGP16X/MGP12X Owner’s Manual
21
Controls and Connectors
Built-in digital effects section
About the Detailed Setting Mode
The detailed setting mode lets you adjust the attenuation of
the CH15/16 (CH11/12) for adjusting the play level from the
iPod/iPhone, and also adjust the range of the Ducker function.
Procedure
1. Press both FX1 and FX2 PROGRAM knobs simultane-
ously for at least two (2) seconds.
2. “P” flashes on the FX1 LED display and “A” or “d”
lights on the FX2 LED display.
The mixer enters the detailed setting mode. The available
detailed setting parameters, LED display, and range are as
follows.
3. Use the PROGRAM knob to select the parameter (“A”
or “
d”) you want to change.
4. Use the FX2 PARAMETER control to adjust the attenua-
tion.
Please refer to the above table for the range.
5. Press the PROGRAM knob again.
The mixer saves the settings, and then exits the detailed
setting mode.
NOTE
• The mixer retains the last setting made, even after the
power is turned off.
• To restore the default settings, press the TAP button while
in the condition of step 3 above.
• When the parameter setting is different from the default
setting (i.e., when you’ve changed the parameter value
from the default), a dot indication is displayed at the lower
right of the FX2 program number.
* The Ducker attenuation range is common for CH13/14 and
CH15/16 (MGP12X: CH9/10 and CH11/12).
Parameter LED display Range
CH15/16 (CH11/12)
Attenuation
(Attenuator)
A
-24dB – 0dB
Ducker Attenuation
(Ducker Range)
d
-70dB – 0dB
-12dB
-7dB-19dB
-24dB 0dB
-35dB
-56dB -21dB
-70dB 0dB
i
o
t
r
!0
u
y
e
w
q