Filter
Top Products
Using the Controllers
MM6/MM8 Owner’s Manual 41
■Knobs ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
You can change the brightness and tonal characteristics of the current Main Voice and Dual Voice in real
time by turning the knobs while you play.
Turn a knob to the right to increase the value, and left to decrease it.
■Footswitch ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
An optional FC4 or FC5 Footswitch connected to the SUSTAIN jack on the rear panel lets you control sus-
tain. For example, you can turn sustain on or off with your foot while playing with both hands.
■Foot Controller ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
You can connect an optional Foot Controller (FC7) to the FOOT CONTROLLER jack on the rear panel.
The ability to control volume with your foot can be an advantage during live performance.
CUTOFF Raises or lowers the filter cutoff frequency to adjust the brilliance of the tone.
RESONANCE Adjusts the peak level around the cutoff frequency.
ATTACK Determines the attack time of the sound.
For example, you can adjust a strings voice so that the sound gradually swells in volume
by setting a slow attack time ... simply turn this knob to the right.
RELEASE Determines the release time of the sound.
Tur ning the knob to the right increases the release time and (depending on the voice) lets
the sound sustain after the key is released. To produce a sharp release, in which the
sound abruptly cuts off, set a short release time.
External Controllers
Decrease value. Increase value.
Rear Panel
FC4 or FC5
FC7
• Sustain can be applied only to the main and dual voices.
NOTE