Filter
Top Products
Storing/Saving Data
MM6/MM8 Owner’s Manual 67
1
Connect a USB storage device to the
USB TO DEVICE terminal, being careful
to insert it in the proper direction.
2
Check that “CONNECT” is showing in
the MAIN display.
You can go to the FILE CONTROL display
from which you can access USB storage device
operations by pressing the [MENU] button
from this display.
(Do not press this button now, but only when
instructed to in the section below.)
Using a USB Storage Device
• In order to play songs copied to a USB storage device from a
computer or other device, the songs must be stored either in
the USB storage device’s root directory or a first-level/second-
level folder in the root directory. Songs stored in these location
can be selected and played as USB songs (page 26). Songs
stored in third-level-folders created inside a second-level folder
cannot be selected and played by this instrument.
USB Storage Device (Root)
Can Be
Selected/
Played.
Cannot Be
Selected/
Played.
Song
File
Song
File
Song
File
Song
Folder
Song
Folder
Song
Folder
root
IMPORTANT
Menu Page
Format 68
User File Save 69
SMF Save 70
Load 71
Delete 72
A message (information or confirmation
dialog) will sometimes appears on the dis-
play to facilitate operation. Refer to the
“Messages” section on page 83 for expla-
nations of each message.
CONNECT
• No sound will be produced if you play the keyboard while FILE
CONTROL display is showing. Also, in this state only buttons related
to file functions will be active.
NOTE
• The FILE CONTROL display will not appear in any of the following
cases:
• During pattern or song playback
• While data is being loaded from a USB storage device
NOTE