Filter
Top Products
Storing/Saving Data
MM6/MM8 Owner’s Manual 71
User and pattern files residing on a USB storage device can be loaded into the instrument.
1
With the USB storage device containing
the file you want to load connected to
the USB TO DEVICE connector, check
that “CONNECT” is showing in the
MAIN display.
2
Press the [MENU] button.
3
Use the CATEGORY [DEC] / [INC] but-
tons to locate the Load item.
4
Use the dial to select the user file or
pattern file you want to load.
All user files in the USB storage device will be
displayed first, followed by the pattern files.
5
Press the [EXECUTE] button.
A confirmation message will appear on the dis-
play. You can press the [DEC/NO] button at
this point to cancel the operation.
6
Press the [EXECUTE] button again, or
the [INC/YES] button, and the load oper-
ation will begin.
7
A message will appear on the display
when the operation is complete.
Press the [EXIT] button to return to the MAIN
display.
Loading User Files and Pattern Files
• When a User file is loaded, user songs 001–005, the user patterns,
and the performance memory will all be overwritten. If you only
load a pattern file, only the user patterns will be overwritten. Save
important data to a USB storage device before loading data that
will overwrite it.
•Pattern files created on other Yamaha keyboards (“sty” file exten-
sion only) can be loaded into MM6/MM8 User Pattern No. 169. Pat-
tern files cannot be created using the MM6/MM8.
CAUTION
•Pattern files must be located in the root directory. Pattern files
located within folders will not be recognized.
NOTE
• Once the load-in-progress message appears in the display, the
operation cannot be canceled. Never turn off the power or
remove the USB storage device during this operation.
CAUTION
• The SMF saved to a USB storage device can not be loaded as a
user song.
NOTE