Filter
Top Products
MV12/6 — Owner’s Manual
Frequency response 20Hz—20kHz +1dB, -3dB @+4dB, 600Ω (INPUT GAIN Control at minimum level)
Total harmonic distortion <0.1% (THD+N) @+14dB, 20Hz—20kHz, 600Ω
Hum & Noise -128dB Equivalent input noise
-95dB Residual output noise
-64dB (68dB S/N) ST OUT:
Master fader and one channel fader at nominal level, channel
assign switch ON.
-90dB (94dB S/N) ST OUT:
Master fader at nominal level, all channel assign switches
OFF, all GROUP to ST switches OFF.
-90dB (94dB S/N) GROUP OUT:
Master fader at nominal level, all channel assign switches OFF.
-84dB (88dB S/N) AUX SEND, EFFECT SEND:
Master level control at nominal level, all channel send controls
at minimum level.
Maximum voltage gain 60dB INPUT (MIC) to INSERT OUT
84dB INPUT (MIC) to GROUP OUT
84dB INPUT (MIC) to ST OUT (CH to ST)
94dB INPUT (MIC) to ST OUT (GROUP to ST)
76dB INPUT (MIC) to AUX1 SEND, AUX2 SEND (PRE)
86dB INPUT (MIC) to AUX2 SEND (POST) , EFFECT SEND
58dB INPUT (LINE) to ST OUT (CH to ST)
58dB ST INPUT to ST OUT (CH to ST)
Monaural input gain control 44dB variable
Stereo input gain control 44dB variable
Crosstalk at 1kHz -70dB adjacent input
-70dB input to output (CH INPUT)
Input channel equalization ±15dB Maximum
HIGH 10kHz shelving
MID 2.5kHz peaking
LOW 100Hz shelving
* Turn over/Roll off frequency of shelving: 3dB below maximum variable level.
Monaural and stereo input peak indicators Red: Each channel, when the level of the post EQ signal for each channel exceeds
+17dB the indicator will light.
Level meters 12 points LED x2
Graphic equalizer 7 bands (125, 250, 500, 1k, 2k, 4k, 8kHz)
±12dB Maximum
Internal digital effect 16 types
Phantom power +48V (balanced) : Supplied at the Input Select Switch = MIC(+48V) position
Lamp connector XLR type (Lamp Compatibility: AC or DC12V, 0.5A Max)
Power supply/Power consumption USA and Canadian: 120V AC 60Hz, 50W
General: 230V AC 50Hz, 50W
Dimensions (W x H x D) 482 x 308 x 192 mm (7U Rack Mount Size)
Weight 9.0kg
Accessories 3 pin Euro-block connectors: 18
Feet: 4
For European Model 0dB=0.775Vrms
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 10A
Conformed Environment: E1, E2, E3 and E4
Supplement
Specifications
■ General specifications
14 Supplement
(Rs=150Ω, 20Hz—20kHz, INPUT GAIN Control=Max.,
Input Sensitivity=-60dB)
* Measured with 12.7kHz, -6dB/oct. low pass filter.
(Equivalent to 20kHz, -
∞
dB/oct. filter.)
(CH MIC INPUT to ST, GROUP OUT/AUX, EFFECT SEND)
(CH MIC INPUT to ST, GROUP OUT/AUX, EFFECT SEND)