Yamaha N2 Electronic Keyboard User Manual


 
28 N3/N2 Owner’s Manual
Recording your Performance
ENGLISH
3
Start recording.
Recording starts as soon as you play the keyboard.
Alternatively, press the [PLAY/STOP] button to start recording.
The [RECORD] button indicator and the [PLAY/STOP] button indicator light
up.
4
Stop recording.
Press either the [RECORD] or [PLAY/STOP] button to stop
recording.
Data writing will begin.
When the recording is finished, the “
End
” appears on the
display for three seconds.
5
Play back the recorded performance.
Press the [PLAY/STOP] button to start playback of the recorded performance.
You can play back the song recorded to the instrument using the Record function (page 27). You can also play the key-
board along with the playback.
Refer to page 31 to playback the song recorded to a USB flash memory device.
1
Engage User Song mode.
While holding down the [DEMO/SONG] button, press the
[+] or [-] button until “
Usr
” appears on the display.
2
Start playback.
Press the [PLAY/STOP] button to start playback.
3
Stop playback.
Press the [PLAY/STOP] button again to stop playback.
If the metronome was on when you
started recording, you’ll be able to keep
time with the metronome while record-
ing, but the metronome sound will not
be recorded.
If the memory becomes full during
recording, “
FUL
” will appear on the
display and recording will stop automati-
cally. (All recorded data up to that point
will be retained.)
If you wish to erase previously recorded
data to the instrument, press the [PLAY/
STOP] button to start recording, then
press it again to stop recording. Do not
connect any USB device during this
operation.
The song data recorded to a USB flash
memory device can be erased by using a
computer.
When you record to a USB flash memory
device directly, if you select another
song or disconnect the USB device after
recording, the recorded performance
cannot be played back by pressing the
[PLAY/STOP] button. Refer to “Listening
to songs in USB Flash Memory” on page
31 to play back the song.
Do not turn off the power to the instrument or disconnect the USB flash memory device, while the instru-
ment is recording the data (while “
---
“ is displayed ). Otherwise, all recorded data, including the
data being recorded, will be lost.
End
CAUTION
Playing Back the Song Recorded to the Instrument
112,
3
User song:
In this manual, the performance data
recorded to this instrument is called a
“User song”.
Usr
26