Filter
Top Products
N3/N2 Owner’s Manual • 29
Recording your Performance
ENGLISH
The recorded user song data on this instrument can be saved to a USB flash memory device. Before using a USB flash
memory device, be sure to read “Precautions when using the USB [TO DEVICE] terminal” on page 30.
1
Engage Saving mode.
Make sure that a USB flash memory device is connected to the instrument, then
while holding the [FUNCTION] button, press the [PLAY/STOP] button.
↓
“
U
xx” (xx is a number) appears on the display after “
SAu
.”
If you wish to cancel saving, press any button other than [
PLAY/STOP
] button
before you go on to the next step.
2
Save the data.
Press the [PLAY/STOP] button.
↓
Data writing will begin.
When the saving is finished, “
End
” appears on the display
for three seconds.
Saving Your Recorded Performance to USB Flash Memory
11,
2
Songs recorded on this instrument are
saved under the file names of “USER-
SONGxx.mid” (xx is a number 00–99) in
the “USER FILES” folder.
The number of available file containers is
100 (
U00
–
U99
).
Do not turn off the power to the instrument or disconnect the USB flash memory device, while the instru-
ment is saving the data to the USB device (while “
---
“ is displayed ). Otherwise, all data, including
the data being saved, will be lost.
End
CAUTION
27