Filter
Top Products
N3/N2 Owner’s Manual • 33
ENGLISH
Formatting USB Flash Memory
Certain USB flash memory devices may require formatting before they can be used by this instrument.
If you format a USB flash memory that already contains data, all of the data will be erased. Be careful not to
erase important data when using the format function.
1
Engage the Format mode.
After connecting the USB flash memory device to be formatted to the instrument,
press the [RECORD] button while holding the [FUNCTION] button.
↓
The message “
For
” (Format) appears on the display.
2
Start Formatting.
After pressing the [PLAY/STOP] button, a “
n Y
” message appears on the display.
Press the [+] button to execute the formatting operation. Press the [-] button to can-
cel formatting.
↓
When the formatting is finished, “
End
” appears on the display for three seconds.
3
Exit from the Format mode.
Press any one of the buttons.
CAUTION
121 2
Do not turn off the power to the instrument or disconnect the USB flash memory device, while the instru-
ment is formatting the USB device (while “
---
“ is displayed ). Doing so may damage the data or the
USB flash memory itself.
For
CAUTION
31