Filter
Top Products
34 • N3/N2 Owner’s Manual
ENGLISH
Backing up Data and
Initializing the Settings
The following data will be saved to internal memory of the instrument. The data is maintained even when the power is
turned off.
• Metronome volume (page 21)
• Fine-tuning of the pitch (page 25)
• Character code (page 31)
• User song data recorded to the instrument (page 27)
When you initialize the data, all data, excluding the character code setting and the User song, will be initialized and
reset to the factory default settings.
While holding down the [METRONOME] button and the [REVERB] button,
turn on the power to the instrument.
↓
While the instrument is initializing the data, “
CLr
” appears
on the display.
Backup data in internal memory
Initializing the data
If this instrument somehow becomes
disabled or malfunctions, turn off the
power to the instrument, then perform
the initialization procedure.
Do not turn off the power to this instrument while it is initializing the data in its internal memory (while
“
CLr
” is displayed).
CLr
CAUTION
32