Filter
Top Products
36 • N3/N2 Owner’s Manual
Connections
ENGLISH
r AUX IN [L/L+R] [R] jacks
The stereo outputs from another instrument can be connected to these jacks,
allowing the sound of an external instrument to be reproduced via the N3/N2’s
speakers. Refer to the diagram below and use audio cables to make the connections.
t AUX OUT [L/L+R] [R] jacks
These jacks let you connect the instrument to external powered speaker systems, for
playing in larger venues at higher volumes. Refer to the diagram below and use
audio cables to make the connections.
Use only the AUX IN [L/L+R] jack for
connection with a mono device.
When the instrument’s AUX IN jacks are connected to an external device, first turn on the power to the
external device, then to the instrument. Reverse this order when you turn the power off.
CAUTION
AUX OUT
OUTPUT
AUX IN
AUX IN
audio cable
phone plug
(standard)
phone plug
(standard)
Tone Generator
audio cable
phone plug
(standard)
phone plug
(standard)
Instrument
Use audio cables and adaptor plugs with
no resistance.
When the sound from the AUX OUT
jacks is routed to the AUX IN jacks, the
input sound will be output from the
speaker of the instrument. The output
sound may be excessively loud and may
cause noise.
Use only the AUX OUT [L/L+R] jacks for
connection with a mono device.
When the instrument’s AUX OUT jacks are connected to an external audio system, first turn on the power
to the instrument, then to the external audio system. Reverse this order when you turn the power off.
CAUTION
AUX INAUX OUT
audio cable
phone plug
(standard)
phone plug
(standard)
Powered speaker
Instrument
34