Filter
Top Products
R
e
f
e
r
e
n
c
e
70 PSR-S500 Owner’s Manual
The Functions
The “Functions” provide a wide range of both detailed and overall instrument parame-
ters, such as adjusting the tuning, setting the split point, and editing the voices and
effects.
There are 49 function parameters in all.
1
Find the function you want to set in the
list that begins on page 71.
2
Press the [FUNCTION] button.
3
Select a function. Press the CATEGORY
[] and [ ] buttons as many times as
necessary until the function’s display
name appears in the display.
Take a look at the function list starting on page
71.
The name of the previous item in the list
appears to the upper left, and the name of the
next item in the list appears to the upper right
of the currently selected item.
4
Use the dial or the [+/YES] and [-/NO]
buttons, to set the parameters.
The [+/YES] and [-/NO] buttons are used to
make ON/ OFF type settings: [+/YES] = ON,
[-/NO] = OFF.
In some cases, pressing the [+/YES] button
will execute the selected function, and press-
ing [-/NO] will cancel the selection.
Press the [+/YES] and [-/NO] buttons simulta-
neously to recall the default setting (excepting
the initial setup of MIDI).
Selecting and Setting Functions
f
r
Previous item
Function
group
Next item
Current selected item
Parameter
• Increment value by 1.
•ON
•Execute
• Decrement value by 1.
• OFF
• Cancel
Press these simulta-
neously to recall the
default setting.