Filter
Top Products
Using USB Flash Memory
76 PSR-S500 Owner’s Manual
Three types of data are saved to one “User File” by this operation: user song, style file, and registration mem-
ory data. When you save a “User File” the style file and registration memory are also saved automatically.
1
Make sure that a appropriately format-
ted USB flash memory device has been
properly connected to the instrument’s
USB TO DEVICE terminal, and that a
“CONNECT” message is shown in the
MAIN display.
2
Press the FILE MENU [MENU] button.
3
Use the CATEGORY [ ] and [ ] but-
tons to locate the User File Save item.
A default file name will automatically be cre-
ated.
4
Press the [EXECUTE] button. A cursor
will appear below the first character in
the file name.
5
Change the file name as necessary.
• The [1] button moves the cursor to the left,
and the [2] button moves it to the right.
• Use the dial to select a character for the cur-
rent cursor location.
• The [8] button deletes the character at the cur-
sor location.
6
Press the [EXECUTE] button. The dis-
play prompts you for confirmation.
You can cancel the save operation at this point
by pressing the [-/NO] button.
7
Press the [EXECUTE] button again, or
the [+/YES] button, and the save opera-
tion will begin.
The user song will be stored to the USER FILE
folder in the USB flash memory device.
8
Press the [EXIT] button to return to the
MAIN display.
Saving Data
● To Overwrite an Existing File
If you want to overwrite a file that already exists
on the USB flash memory device, use the dial or
the [+/YES] and [-/NO] buttons to select the
file, then skip ahead to step 6.
f
r
• If the USB flash memory has been write-protected, an appropriate
message will appear in the display and you will not be able to exe-
cute the operation.
• If there is not enough capacity left on the USB flash memory device
to save the data, an appropriate message will appear in the display
and you will not be able to save the data. Erase unwanted files from
the USB flash memory device to make more memory available
(page 79), or use a different USB device.
• Refer to the “Messages” list on page 96 for other possible errors that
might prevent you from completing the operation.
NOTE
Cursor
Cursor
right
Delete
character
Cursor
left
Select
characters
• Once the save-in-progress message appears in the display, the
operation cannot be canceled. Never turn off the power or
remove the USB flash memory device during this operation.
CAUTION
• If an existing filename is specified the display prompts you for confir-
mation. Press [EXECUTE] or [+/YES] if it is OK to overwrite the file,
or [-/NO] to cancel.
• The amount of time it will take to perform the save operation
depends on the particular USB flash memory device you are using.
NOTE