181
3
Chapter 3. VOICE MODE
3. Voice edit
12. Pitch bend control
• For each part, this sets the width of the pitch change that
can be controlled by pitch bend.
• With a setting of +12, the pitch will change one octave when
pitch bend is fully raised or lowered.
• With negative settings, the direction of pitch change will be
inverted.
0101
1101
-24–+00–+24
13. Dry level
• This parameter can be set only if the Effect mode Variation
Mode is set to System. If Variation Mode is set to Insertion,
this parameter will not be displayed.
• For each part, this sets the amount that will be sent to the
dry line of the effect.
• Increasing the Dry Level will decrease the effect.
• Decreasing the Dry Level will cause the stereo position of
sounds which pass through that effect to gather in one loca-
tion.
0101
1101
000 – 127