Filter
Top Products
Other Functions
ZOOM A2.1u
25
1.
Turn power to the A2.1u on while
keeping the [PEDAL ASSIGN] key
depressed.
The indication "dn" appears on the display.
2.
With the expression pedal fully
raised, press the [STORE] key.
The display indication changes to "UP".
3.
Push the expression pedal fully down
and then lift your foot off the pedal.
4.
Press the [STORE] key once more.
The expression pedal adjustment is completed,
and the unit returns to play mode.
HINT
• The point where the module is switched on or off
when the pedal is depressed is always the same,
regardless of the action taken in step 3.
• If "Er" appears on the display, repeat the
procedure from step 2.
Using an external
expression pedal (FP01/
FP02)
When you connect an optional expression pedal
(FP01/FP02) to the [CONTROL IN] jack of the
A2.1u, you can use that pedal as a volume pedal,
separately from the built-in expression pedal.
1.
Plug the cable from the external
expression pedal into the [CONTROL
IN] jack, and then turn the A2.1u on.
2.
Operate the external expression
pedal in play mode or edit mode.
The volume changes.
HINT
The external expression pedal always functions as a
volume pedal.
Using a foot switch (FS01)
Connecting an optional foot switch (FS01) to the
[CONTROL IN] jack of the A2.1u allows bank
switching in play mode. It is also possible to
switch bypass/mute on and off, control the tap
tempo function, or perform other functions with
the foot switch.
1.
Plug the cable from the FS01 into the
[CONTROL IN] jack, and then turn
the A2.1u on.
2.
Set the Module selector to the
"CONTROL" position.
The A2.1u goes into edit mode. You can now
make settings for the expression pedal or foot
switch.
DN
Push strongly,
so that pedal touches
here.
When foot is lifted,
pedal returns slightly.
eA21u.fm 25 ページ ２００５年１１月４日 金曜日 午後５時２３分