Filter
Top Products
Effect Types and Parameters
ZOOM A2.1u
37
CONTROL
CONTROL module
Serves for making built-in expression pedal settings and lets you control the foot switch
function and master level setting applying to all patches.
Ct
CONTROL
RTM
DESTINATION
See Table 3
FS
See Table 4
MASTER
LEVEL
0 – 98, 1.0
Selects the modulation target module
that is controlled with the built-in
expression pedal (see Table 3).
When a foot switch (FS01) is connected
to the [CONTROL IN] jack, this selects
the function that can be operated with
the foot switch (see Table 4). The
function selected here applies to all
patches.
Adjusts the master level for all patches.
[Table 3] [Table 4]
Setting Modulation target Setting Function
oF
OFF
bP
Bypass/Mute
vL
Volume
tP
Tap tempo
CU, Cd, CH, CL
COMP/LIMIT module (*)
bU
Bank up
tU, td, tH, tL
TONE parameter of MODEL module (*)
rH
Rhythm function on/off
EU, Ed, EH, EL
MOD/EFX module (*)
dH
Delay hold
dU, dd, dH, dL
DELAY/REVERB module (*)
dM
Delay input mute
Fb
Frequency of feedback control function.
Mn
Manual mode on/off
Fb
Feedback control function on/off
CT
"UP"
Maximum value
Minimum value
Maximum value
Maximum value
V
alue set in patch
V
alue set in patch
Minimum value
Minimum value
"DOWN"
"HIGH"
"LOW"
The operation of modules denoted by (*) changes as follows,
according to the letter at right.
UP
The parameter is at minimum when the pedal is fully raised and
at maximum when the pedal is fully pushed down.
DOWN
The parameter is at maximum when the pedal is fully raised and
at minimum when the pedal is fully pushed down.
HIGH
When the pedal is fully raised, the parameter is at the value set in
the patch. When the pedal is fully pushed down, the parameter is
at maximum.
LOW
When the pedal is fully raised, the parameter is at minimum.
When the pedal is fully pushed down, the parameter is at the
value set in the patch.
U
D
H
L
eA21u.fm 37 ページ ２００５年１１月４日 金曜日 午後５時２３分