Installation Guide
6
Before You Begin
Before you begin installation, register your product at:
www.3com.com/productreg.
The Network Jack is available in single- and 20-packs. Before you
begin the installation, make sure you have the following items,
which are included with the Network Jack:
■
6x32 screws (2 per Network Jack) for mounting the
Network Jack to the wall or office cubicle.
■
RJ-45 coupler cable (1 per Network Jack) for connecting
the Ethernet cable from the network to the Network Jack
(required only if your network cable is terminated with a
female RJ-45 connector).
■
Installation guide (1 per package).
Additionally, the following items are shipped with the single pack:
■
Adapter plates for installing connectors to use as pass-
through ports. The adapter plates accommodate connectors
from suppliers including:
■
Panduit (RJ-45 and RJ-11)
■
Avaya (RJ-45 and RJ-11)
■
Adapter plate screws (2) for mounting the adapter plate to
the Network Jack.
NOTE:
The connectors for the adapter plates must be
purchased from the manufacturer. For a list of supported
connectors, go to www.3com.com/.
