SERVSELECT IP VM INSTALLER/USER GUIDE
22
• In the Main window, double-click the target device name, eID number, or port
number.
• Type the port number, and press Enter.
• Type the first few characters of the target device name or eID number, and press
Enter.
You can toggle between two selected target devices. To select the previously selected
target device, press Print Screen and press Backspace.
To disconnect the user from a target device, press Print Screen and press Alt+0. A Free
status flag in the OSD interface indicates that the user is not connected to a target device.
4.4 Using the OSD interface
This table describes the keys, key combinations, and mouse actions that you can use in the
OSD interface. Two or more key names or mouse actions that are separated by commas
indicate a sequence of actions. Two or more key names or mouse actions that are
separated by a plus sign (+) indicate a combination of actions; that is, they are performed
simultaneously.
You can use the main keyboard or the numeric keypad to type numerals, except when you
use the Alt+0 key combination; you must use the 0 key on the main keyboard when you
use Alt+0.
OSD interface navigation basics
Key, key combination, or
mouse action
Result
Print Screen; Ctrl, Ctrl; Shift,
Shift; or Alt, Alt
Start the OSD interface. To specify which key
sequences can be used to start the OSD interface,
click Setup > Menu.
Print Screen, Print Screen
Send the Print Screen keystroke to the currently
selected target device. In other words, a screen
capture will be performed for the target device.
If Print Screen is not selected as startup key
sequence in Setup > Menu, you only need to press
Print Screen once to take a screen capture of the
target device.
F1 Display help for the current window.
Escape
In the OSD main window: Close the OSD interface
and return to the status flag on the desktop.
In all other windows: Close the current window,
without saving changes, and return to the previous
window.
In pop-up windows: Close the pop-up window and
return to the current window.
Alt+X
Close the current window, without saving changes,
and return to the previous window.
Alt+O
Click OK and return to the previous window.
