CHAPTER 4: BASIC OPERATIONS
25
Assigning target device names
Use the Names window to identify individual target devices by name rather than by port
number. The Names list is always sorted by port order. Names are stored in the SAM, so
even if you move the cable or target device to another target device interface port, the
name and configuration are recognized by the appliance. If a target device is turned off,
you cannot modify the name of the SAM.
To access the Names window, complete the following steps:
1. Press Print Screen to start the OSD interface. The Main window opens.
2. Click Setup > Names. The Names window opens.
Security
Set passwords to restrict access to the target devices. Enable the
screen saver.
Flag
Change the display properties including timing, color, and location of
the status flag.
Language Specify the language that the interface is displayed in.
Devices
Specify the number of ports that are on the attached tiered
appliance.
Names Assign a unique name to each target device.
Keyboard Specify the keyboard country code.
Broadcast
Simultaneously control multiple target devices through keyboard
and mouse actions.
Scan Set up a custom scan pattern for up to 16 target devices.
Preempt Specify preemption settings.
Network
Specify the network speed and configuration, IP address, netmask,
and gateway for the switching system.
Setup features to manage routine tasks for the target devices
Option Purpose
