A SERVICE OF

logo

SERVSELECT IP VM INSTALLER/USER GUIDE
46
TFTP target device IP address 10.0.0.3
Upgrade file name equal to CMN-XXXX.fl, where XXXX is the 4-digit Compliance
Model Number (CMN) that is printed on the agency label of the appliance
To repair damaged firmware, complete the following steps:
1. Connect the appliance to the TFTP target device (using a cross-over cable or hub),
which is set up with the default IP address (10.0.0.3).
2. Rename the upgrade file to the default file name (CMN-XXXX.fl).
The Power LED will flash at about 2 Hz when the appliance is downloading the upgrade
file, and it will flash at about 4 Hz when it is programming the downloaded file to flash.
After it has restored the firmware, the appliance reboots automatically and the Power LED
is lit.