Using Basic Phone Functions
Putting a Call on Hold
Cisco Small Business SPA525G and SPA525G2 SPCP IP Phones User Guide 37
3
Using Mute
To mute the phone microphone, speaker, or headset microphone, press Mute. The
button lights red. Press Mute again to unmute.
Putting a Call on Hold
To put an active call on hold, press Hold. A series of beeps (default) or (optional)
music-on-hold plays for the caller to indicate that the call is on hold.
Resuming a Call
To resume the call, press the (optionally configured) flashing–red line button for the
call. If you have multiple calls, all calls are put on hold except the active call.
Ending a Call
To end a call:
• If you are using the handset, hang up.
• If you are using the speakerphone, press Speaker.
• If you are using the headset, either press the Headset button (wired) or replace
the receiver (wireless).
•Press EndCall to hang up one call, and preserve another call. If necessary,
remove the call from hold by pressing the line button.
