A SERVICE OF

logo

REMOVING THE SPINDLE FROM THE MACHINE
Note: Always lift the spindle from the body and not from the shaft.
1. Turn off the spindle. Make sure the shaft has stopped before continuing.
2. Follow the machine’s safety and installation instructions.
3. Disconnect power cable.
4. Disconnect signal cable.
5. Turn off air supply.
6. Disconnect air pipes from the spindle.
7. Remove wheel D-400 (ø65 mm).
8. Remove wheel D-1400 (ø76 mm).
9. Close AO and AI holes with plastic plugs x2.
10. For unclamping the spindle from the machine, screw out M5 screws.
11. Return the spindle to its original package for storing or sending.
NDLEOUNT RIGHT FROM SPIDISASSEMBLY WHEEL M
9