xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
100
show multicast filtering_mode
Purpose Used to show the multicast packet filtering mode as configured for the VLANs.
Syntax
show multicast filtering_mode {vlan <vlan_name 32>}
Description This command is used to display the current multicast packet filtering mode for specified
VLANs or all VLANs on the Switch.
Parameters vlan <vlan_name 32> – Specifies a VLAN to display multicast filtering status.
Restrictions None.
Example usage:
To view the multicast filtering mode for all VLANs:
DGS–3426:5#show multicast filtering_mode
Command: show multicast filtering_mode
VLAN Name Multicast Filter Mode
––––––––––––––––– –––––––––––––––––––––––––––––
default filter_unregistered_groups
v1 filter_unregistered_groups
v2 filter_unregistered_groups
v3 filter_unregistered_groups
DGS–3426:5#
show ipfdb
Purpose Used to display the current IP address forwarding database table.
Syntax
show ipfdb <ipaddr>
Description This command is used to display the current contents of the Switch’s IP forwarding
database.
Parameters <ipaddr> – The user may enter an IP address by which to view the table.
Restrictions None.
Example usage:
To view the IP forwarding database table:
