xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
317
config command prompt
Purpose Used to configure the command prompt.
Syntax
config command_prompt [<string 16> | username | default]
Description This command is used to change the command prompt.
Parameters string 16 – The command prompt can be changed by entering a new name of no more
than 16 characters.
username – The command prompt will be changed to the login username.
default – The command prompt will reset to factory default command prompt.
Restrictions Only Administrator and Operator-level users can issue this command. Other restrictions
include:
• If the “reset” command is executed, the modified command prompt will remain
modified. However, the “reset system/config” command will reset the command
prompt to the original factory banner.
Example usage
To modify the command prompt to “AtYourService”:
DGS–3426:5#config command_prompt AtYourService
Command: config command_prompt AtYourService
Success.
AtYourService:5#
