xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
270
DGS–3426:5#config authen_enable method_list_name Tiberius method tacacs xtacacs
local
Command: config authen_enable method_list_name Tiberius method tacacs xtacacs
local
Success.
DGS–3426:5#
Example usage:
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order:
DGS–3426:5#config authen_enable default method xtacacs tacacs+ local
Command: config authen_enable default method xtacacs tacacs+ local
Success.
DGS–3426:5#
delete authen_enable method_list_name
Purpose Used to delete a user–defined method list of authentication methods for promoting
normal user level privileges to Administrator level privileges on the Switch.
Syntax
delete authen_enable method_list_name <string 15>
Description This command is used to delete a user–defined method list of authentication methods for
promoting user level privileges to Administrator level privileges.
Parameters <string 15> – Enter an alphanumeric string of up to 15 characters to define the given
enable method list to delete.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete the user–defined method list “Permit”
DGS–3426:5#delete authen_enable method_list_name Permit
Command: delete authen_enable method_list_name Permit
Success.
DGS–3426:5#
